Kenwood Compatible KPG-46 Programming Cable
FTDI vcp Drivers HERE
Driver Installation Guide HERE
Drivers support Win XP, Vista, 7, 8, 8.1, 10, 11, Linux
The FT232RL is a USB to serial UART interfac with the following advanced features:
- Connectors: USB to RJ45
- Single chip USB to asynchronous serial data transfer interface.
- Entire USB protocol handled on the chip. No USB specific firmware programming required.
- Fully integrated 1024 bit EEPROM storing device descriptors and CBUS I/O configuration.
- Fully integrated USB termination resistors.
- Fully integrated clock genertion with no external crystal required plus optional clcok output selection enabling a glue-less interface to external MCU or FPGA.
- Data transfer rates from 300 baud to 3Mbaud (RS422, RS485, RS232) at TTL levels.
- 128 byte receive buffer and 256 byte transmite buffer utilising buffer smoothing technology to allow for high data throughput.
- FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
- Unique USB FTDIChip-ID feature.
- Configurable CBUS I/O pins.
- Transmit and receive LED drive signals.
- UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.
- FIFO receives and transmits buffers for high data throughput.
- Synchronous and asynchronous bit bang interface options iwth RD# and WR# strobes.
- Device supplied pre-programmed with unique USB serial number.
- Supports bus powered, self-powered and high-power bus powered USB configuratios.
- Integrated +3.3V level converter for USB I/O.
- Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic.
- True 5V/3.3V/2.8V/1.8V CMOS drive output and TTL input.
- Configurable I/O pin output drive strength.
- Integrated power-on-reset circuit.
- Fully integrated AVCC supply filtering – no external filtering required.
- UART signal inversion option.
- +3.3V (using external oscillator) to +5.25V (internal oscillator) Single Supply Operation.
- Low operating and USB suspend current.
- Low USB bandwidth consumption.
- UHCI/OHCI/EHCI host controller compatible.
- USB 2.0 Full Speed compatible.
- -40°C to 85°C extended operating temperature range.
For the following Kenwood radios:
NX-700E, NX-700HK, NX-700K, NXB-710, NX-800E, NX-800HK, NX-800HK2, NX-800K, NX-800K2, NX1700, NX1800,
NXR-800K3, NXR-7100, NXR-810,
TK-760, TK-760G, TK-762, TK-762G, TK-763, TK-763G, TK-768, TK-768G, TK-780, TK-780G, TK-785, TK-868, TK-868G, TK-880, TK-880G, TK-885, TK-980, TK-981, TK-6110, TK-7100, TK-7100H, TK-7102H, TK-7150, TK-7160, TK-7160E, TK-7160HM, TK-7160M, TK-7162E, TK-7180, TK-7180E, TK-7180E, MPT TK-7189, TK-7189E, TK-7189E, TK-7302E, TK-7302HM, TK-7302M, TK-8100, TK-8100H, TK-8102H, TK-8150, TK-8160, TK-8160E, TK-8160HM, TK-8160M, TK-8162E, TK-8180, TK-8180E, TK-8180E, TK-8189, TK-8189E, TK-8189E, TK-8302, TK-8302E TK-8302HK2, TK-8302M,2 TK-90
TKR-720, TKR-73,0 TKR-740, TKR-750, TKR-750E (Version 2), TKR-751E, TKR-820, TKR-830, TKR-850, TKR-850E (Version 2), TKR-851E, TKR-7500,TKR-8400
TM-261A, TM-271A, TM-271E, TM-461A, and TM-471A.
Like this:
Like Loading...
Related
