Hytera PD405 PD415 (V5 models) Programming Software V1.01.10.001

Hytera Programming Software PD405 PD415 (V5 models) V1.01.10.001

Hytera PD405

Programming a walkie talkie involves setting it up to communicate effectively on specific frequencies and channels. This process is essential for ensuring clear communication, especially in professional settings like security or construction.

Required Tools

To program your radio, you will need:

• The radio device
• A programming cable
• A PC
• Compatible programming software

Programming Steps

1. Install Software: Download and install the programming software for your specific walkie talkie model on your computer.
2. Connect the Device: Use the programming cable to connect your walkie talkie to the computer.
3. Input Settings: Open the software and enter the desired transmit and receive frequencies, channel spacing, and any privacy codes (CTCSS/DCS tones).
4. Save Settings: After entering the settings, save them to the walkie talkie using the software.
5. Test the Radio: Disconnect the device and test the new settings to ensure they work correctly.

All programming software is for Windows PCs. There is no programming software for Mac computers.

If you wish to use this software on a Mac computer you need to install virtualization software.

You can read about that at the link below.

How to use PC software on a Mac.

Hytera Cable Matrix

Hytera programming software:

Version V1.01.10.001

ONLY for new radios with firmware V5.01.05.001 onwards

USB drivers:

Version 1.30

Total File Size:

127MB

**PD405, PD415 which were
originally supplied with V5.01.05.001 onwards firmware

For Hytera PD405 PD415  Radios

Important, please read. 2021-05-07_Notification – Commercial DMR Hardware Modification 2021.pdf

Important, please read. Hytera CPS Firmware Upgrade Guide.pdf

Hytera PD4xx Series Programming Cable Here